In order to scan tachograph charts you will need to install a Panasonic KV-S1025C Scanner. There are 4 parts of the scanner install; Panasonic Scanner Install sometimes known as Panascan, TWAIN driver, User Utility and Tachograph utility. We would recommend that they are installed in the following order: 1) Panasonic Scanner Install/Panascan 2) Twain Drivers 3) User Utility 4) Tachograph Utility We advise that the scanner is NOT connected to the PC during the installation process. Please Note:
1) To Install Panasonic scanner/ Panascan – Use the link above and follow the on-screen prompts 2) To install the Twain Drivers Use the link above and follow the on-screen prompts 3) To install the User Utility Use the link above and follow the on-screen prompts Installation of the Scanner User utility will create an icon on your desktop. The User Utiliy options allows you to check that the scanner is connected and working properly. 4) Install the Tachograph Utility above. This is required to enable tachograph charts to be scanned using this equipment. Connecting the scanner After completing the installation the scanner can be connected to the PC and switched on. We recommend that you select a USB port on the PC and leave the scanner connected to it. If for any reason it needs to be disconnected from the PC, always reconnect to the same USB port. The following information will be shown on your PC in the bottom right hand corner. To check that the scanner has installed properly and is ready to use click on the Panasonic Scanner User Utility to check the scanner status. And Finally You should set the Panasonic Tachograph User Utility in order that tachograph charts can be scanned Click on the icon on your Desktop illustrated below; Then select "on (custom setting)" and "Set" and then "Close."
Topical news, feature articles and compliance updates to keep you up to date with the industry's stories.
You can use the "Forgotten Password" link below (to set up a login) if you're logging in for the first time, or if you already a login and have just forgotten your password.
As long as your company is a member, and we have a record of your email address, then you should be able to reset/update your password, or create a login for yourself, using that "Forgotten Password" link.
Need Help?